+7 (812) 603-76-11 - St. Petersburg
+7 (343) 302-04-98 - Екатеринбург
Switches Q-SERIES
Touch light switch Q-SERIES to control 2 lighting zones
The Vento Electric touch switch used for lighting control two zones of lighting. Installation is carried out without making any additional changes to the existing electrical wiring.
Visual inspection of the position of the switch is performed by two-color (red and blue) illumination. Control is implemented by touching the touch panel or remotely from the console. There is also the possibility of controlling lighting from your smartphone or tablet.
Acceptable lamp types: incandescent lamps, energy-saving, halogen lamps (220 V and low voltage with transformer 12 V and 24V), fluorescent lamp (with electronic ballast), led lamps and led strip.
Ничего не найдено
-
Specifications
- Type of switch Light switch
- The number of control zones 2 zones
- Number of posts 1 post
- The minimum load on a line 3 watts.
- Maximum load per line 1000 watts.
- Working voltage 10-250 V AC, 50-60Hz)
- Degree of protection against dust and moisture IP 20
- Own power consumption ≤00.1 mW
- Service life More than 200,000 switches
- Operating conditions -30~50C, humidity ≤95%
- Led backlight Yes
- Display on/off Yes
- Case material Refractory plastic
- A method of mounting contacts Screws
- Method of mounting the switch Screws
-
3 years warranty!The quality of our products we pay special attention, therefore, on all products give an extended warranty for a period of 3 years.
-
Installation without any worriesNeed to install additional wires. Installation in a standard round mounting box with a diameter of 65-70 mm.
-
Remote controlControl is possible from anywhere in the room within range of the remote control.
-
Color indicationIn the off state of the touch area is highlighted in blue, in red.
-
Led backlightYou can easily use the switches as in poorly lit rooms and in complete darkness.
-
Glass OptiWhiteThe front panel switches made of crystal clear glass OptiWhite